Main Facilities

Environmental measurement and analysis equipment

- Germanium semiconductor detector
- Nal(TI) scintillation survey meter
- Fluorescence microscope
- Phase-contrast microscope
- Polarization microscope
- Low temperature ashing apparatus (Plasma asher)
- High resolution gas chromatograph mass spectrometer (double convergent type HRGC/HRMS)
- Gas chromatograph mass spectrometer (quadrupole HRGC/LRMS)
- Gas chromatograph mass spectrometer equipped with heating and desorbing unit (TDS-GC/MS)
- Gas chromatograph mass spectrometer equipped with canister concentration introduction system
- Plasma emission spectrophotometer (ICP/AES)
- Plasma emission mass spectrophotometer (ICP/AES)
- Ion chromatograph (IC)
- Ion chromatograph equipped with combustion apparatus
- High-speed liquid chromatograph (HPLC) (detector: UV, fluorescence, photodiode array, ELSD and Electric conductivity and organic acid analysis system)
- High-speed liquid chromatograph mass spectrometer (HPLC/MS/MS)
- Gas chromatograph (detector: TCD, FID, FPD, FTD, ECD and PID)
- Frame and frameless atomic absorption spectrophotometers (AA)
- Microwave resolution unit
- X-ray diffractometer
- Scanning electron microscope / energy dispersive X-ray spectroscope
- CHN analyzer
- Total organic carbon analyzers
- Automatic bomb calorimeter
- Fourier transform infrared spectrophotometer (FTIR)
- Visible-ultraviolet spectrophotometer
- Fluorescence spectrophotometer
- Reduced evaporated mercury measuring device
- Thermogravimetric/differential thermal analyzer (TG-DTA)
- Differential scanning calorimeter (DSC)
- Dissolved oxygen analyzer (DO meter)
- Centrifugal precipitation type particle size distribution measuring device
- Automatic water quality analyzer (T-N, T-P, F, NH4, phenol and cyanide)
- Multi water tester (detector: pH, DO, electrical conductivity, turbidity, water temperature and depth)
- Electromagnetic velocity meter
- Circular perforated nozzle type cascade impactor (for measuring exhaust gas)
- Nitrogen oxide concentration meter (for measuring exhaust gas)
- Carbon monoxide concentration meter (for measuring exhaust gas)
- Hydrocarbon analyzers (VOC meter) (for measuring exhaust gas)
- Portable gas chromatograph (PID, DELCD)
- High volume air sampler (for environmental air and work environment )
- Surface soil inspection apparatus
- Digital rock dust meter
- Low volume air sampler (for work environment)
- Air pollution monitoring vehicle (SO2, NOx, CO, SPM, oxidant and Meteorograph)
- Thin-layer chromatography-flame ionization detector (TLC-FID)
- Sound level instrument
- Meteorological observatory equipment (2D and 3D anemometer, thermometer and hygrometer, pyrheliometers and net radiometer)
- Low-frequency sound pressure level measurement device
- Vibrometer
- Frequency analyzer
- Data recorder
- Freeze crusher
- All weather model windbreak screen
- Fiber monitor (for asbestos monitoring)
- Automatic titrator
- Gene amplifier
- Anaerobic chamber
- Next-generation sequencer
- Real-time PCR
- Cell-crushing apparatus
- Plate reader
- Incubator
- Gel image photography
- Acoustic camera
- Growth chamber

Non-destructive inspection equipment

- X-ray computed tomography (XT H320 Nikon Metrology)
- Handheld real-time X-ray image system (OpenVision)
- Scale checker
- AC magnetic inspection device (MDK)
- CFRP ultrasonic flaw detector (TESTIA U32)
- Phased array ultrasonic flaw detector
- Water immersion type ultrasonic flaw detection system (IRIS)
- ECA device Omniscan module (ECA4-32)
- Ultrasonic flaw detector
- Ultrasonic thickness gauge
- Heat exchange tube inner surface baking soda blast system
- Heat exchange tube circulation cleaning system
- Heat exchange tube extreme value analysis measurement system
- Industrial videoscope (IPLEX LX, GX / Everest XLG3TM VideoProbe)
- Industrial portable X-ray equipment
- Gamma ray transmission test equipment
- Large irradiation room (2.8t crane x 2)
- Digital X-ray image system (FUJIFILM COMPUTED RADIOGRAPHY) AC-7 / Dynamix HR2
- Development vehicle for radiography
- Handheld X-ray fluorescence analyzer DELTA
- Digital optical microscope
- Digital microscope
- Equotip 3 hardness tester
- GE/TIV portable hardness tester
- Pole Camera Snake Eye III
- SUMP device
- X-ray FPD inspection equipment

Structural survey equipment and software

- Cavity examining radar
- Infrared thermography
- Reinforcing bar measuring radar
- Schmidt Hammer
- Ultrasonic measuring apparatus (ELSONIC)
- Half-cell potential meter
- Total Station
- Electronic digital leveler
- CCD camera
- Electromagnetic induction type reinforced bar probe (ferroscan)
- Cracked image processing system
- Temperature stress, crack analysis software (JCMAC series)
- Bridge seismic design software (Forum8)
- Bridge inspection support software
- Drone
- Arbitrary shape plane frame stress analysis software (Super Build R / FA1)
- Integrated structural calculation program for RCSR C/S buildings (BUS-6)
- Primary/secondary seismic diagnosis / seismic reinforcement calculation program (DOC-RC / SRC) for RC/SRC buildings
- S-building seismic diagnosis and seismic reinforcement calculation program (DOC-S)

Industrial and civil engineering measurement equipment

- Dynamic strainmeter
- Static strainmeter
- Stress frequency measuring instrument
- Vibration meter
- Displacement transducer
- Settlement gage
- Inclinometer
- Wireless accelerometer
- Monitoring type wireless correlation leak probe

Materials testing and evaluation equipment

- Hydraulic universal tester (capacity 1000 kN)
- Electronic universal tester (capacity 50 kN and 100 kN)
- Charpy impact tester
- Hardness tester (Vickers)
- Hardness tester (Brinell)
- Hardness tester (Rockwell)
- Hydraulic servo fatigue testers (capacity 10 kN x 2 and 100 kN x 1)
- Hardness tester (Equotip)
- Electron probe microanalyser (EPMA)
- Scanning electron microscope (SEM)
- Energy dispersive X-ray spectrometry (SEM-EDX)
- Digital microscope
- Optical microscope
- Polarizing microscope
- Ultrasonic thickness gage
- Constant temperature and humidity chamber
- Constant temperature liquid bath
- Ultrasonic gas flow meter
- Medical X-ray calibration equipment
- Non-contact 3D shape measuring machine

Simulation software and system development environment

Analysis solver
- MSC.Nastran NX.Nastran (static analysis, dynamic analysis)
- LS-DYNA (crash analysis, impact analysis)
- Midas FEA (nonlinear analysis of civil structures)
- Midas GTS NX (geotechnical and tunnel analysis)
- Midas iGEN (general-purpose structural analysis in the field of architecture)
- ANSYS Mechanical (structural analysis)
- ANSYS FLUENT (fluid analysis)
- ALTAIR (Optistruct) general-purpose structural analysis and optimization
- ALTAIR (Radioss) impact analysis, large deformation analysis
- ALTAIR (Acusolv) finite element method -based thermo-fluid analysis
- ALTAIR (Motion Solv) mechanism analysis
- ALTAIR (SimSolid) meshless structural analysis
- SIMULIA Abaqus Unified FEA (implicit method, explicit method)
- FLIP (ground liquefaction analysis)
- Actran (acoustic analysis)
- TDAP III (seismic / structural analysis)
- GroundClub (geothermal heat pump simulator)
- SCRYU/Tetra/scFLOW (thermal fluid analysis)

Pre/Post
- ALTAIR (HyperMesh/Hyper View/Hyper Crash)
- Siemens PLM software FEMAP
- LS -Prepost (Pre Post)
- Sim LAB (PrePost)
- ANSYS CFD Pre Post
- ANSYS EnSight (Post)
- ANSYS SpaceClaim (shape creation)
- ANSYS DesignModeler (shape creation)
- ALTAIR Inspire (shape creation)

System development environment
- VisualStudio (VB, C/C++/C#)
- Eclipse (Java, Python)
- WebPerformer (Web development tool)
- MAXIMO (Web development for equipment management)
- SCADALINXpro (Web development for data logger)