Acoustic exploration

Effective countermeasures can be taken by "visualizing” invisible sounds and identifying their source in the environment and machines. An acoustic camera combines a camera with several directional microphones to display sound in an easy-to-understand manner.

Strain measurement

In order to understand the strain that is generated in mechanical structures and bridges, a strain gauge is attached to the surface of the member to perform a strain measurement. This measurement can be dynamic or static. The measured values are recorded digitally, and the data is provided to the customer.

Mechanical vibration/displacement measurement

Some equipment used in factories, etc. might generate vibration, so we acquire data to consider countermeasures. In addition, contact type and non-contact type displacement measurements are also possible according to the conditions and atmosphere at the installation part.

Temperature measurement

Thermocouples and thermography cameras are used to take temperature measurements, in order to understand temperature conditions due to piping or welding when the boiler is started.

Ground/floor vibration measurement

We perform vibration measurements in order to understand the level of vibration that is generated due to construction work, and use it as data for considering countermeasures.

Flat plate loading test

When installing a building or structure on level ground, you need to know the ground strength. Therefore, we use a flat plate loading test to conduct ground investigation.

Noise measurement

We measure noise and vibration at residences, factories, construction sites, etc., as well as the noise and vibration that are generated by general machinery, vehicles, ships, etc.

Residual stress capacity

Residual stress is often a problem in welds and castings, and we use the strain gauge method to provide surface residual stress measurement data.

Other laboratory tests

We take into consideration a load test using a surface plate as well as the goal of the customer, and then perform the necessary steps.

Position measurements with total station

Total station is used to perform position measurements at the measurement points for the behavior of a structure due to aging.

Inclination/subsidence measurement

When working on embankments or other projects, we use an inclination/subsidence meter to provide measurement data in order to understand whether the work is carried out safely as originally planned.